Terms and Conditions TERMS AND CONDITIONS FOR SALES, SERVICES AND RENTALS ALL SALES, SERVICES, AND RENTALS ARE GOVERNED SOLELY BY THE TERMS AND CONDITIONS HEREIN, NO TERMS PROVIDED BY CUSTOMER, INCLUDING ANY TERMS THAT MAY BE ATTACHED TO A PO OR REQUEST FOR BID, WILL ALTER IN ANY WAY THE TERMS AND CONDITIONS FROM BROCK THIS AGREEMENT CONTAINS PROVISIONS RELATING TO INDEMNITY, RELEASE, LIMITATION OF LIABILITY AND ALLOCATION OF RISK FOR WORK PERFORMED BY ANY BROCK COMPANY (“BROCK”) PRICE : Customer agrees to pay Brock for any services, goods or rentals (sometimes collectively referred to as the “Work”) ordered in accordance with prices quoted to Customer and as such scope is agreed between the Parties (defined herein as Brock and Customer). Prices are exclusive of all taxes - federal, state or local, unless otherwise noted. Any sales or other tax or duty which Brock may be required to collect or pay will be added to the price; if such amounts are not included in any invoice, they may be invoiced separately. INVOICING AND PAYMENT : Brock shall submit invoices to Customer on a routine basis for Work provided on a Cost Plus, Time and Materials, and Unit Rate basis, which shall include charges for Services for which time charges and/or unit costs shall apply and any charges for reimbursable costs. For work provided on a Lump Sum basis, the amount of each invoice shall be determined on the “percentage of completion method” whereby Brock will estimate the percentage of the total work accomplished, including the value of Goods delivered to the site, during the invoicing period. Sales shall be billed upon delivery and rentals shall be billed as agreed by the Parties. Terms of payment are net thirty (30) days following invoice date. Customer agrees that any past due amounts shall bear interest from the date due until paid at the rate of 1.5% per month. In the event of non-payment, Brock may file and foreclose any and all applicable liens and may suspend all Work on Customer’s project as provided herein. Invoices are not subject to discounting or set-offs by Customer, and payment for Work performed is due regardless of suspension or termination of the Work by either party. JOB SITE SAFETY : Neither the activities of Brock nor the presence of Brock or its employees and sub-contractors at a project or construction site, shall relieve Customer or any other entity of their obligations, duties, and responsibilities including, but not limited to, construction means, methods, sequence, techniques or procedures necessary for performing, superintending or coordinating all portions of the Work in accordance with the contract documents and any health or safety precautions required by any regulatory agencies. Brock and its personnel have no authority to exercise any control over any construction contractor, entity, or their employees in connection with their work or any health or safety precautions. LIMITED WARRANTY : With regard to the services furnished by Brock (the “Services”), Brock warrants that such Services shall be performed in a good and workmanlike manner and in accordance with Customer’s written specifications, drawings and instructions provided to and accepted by Brock; such warranty shall extend for a period of twelve (12) months from the date of completion of the given Services, and Brock shall reperform or correct Services to remedy any breach of such warranty provided Customer gives Brock written notice of the issue within the twelve month warranty period. For any Services so corrected, the warranty shall be reinstated for the longer of (a) the remainder of the original warranty period or (b) six (6) months from the date on which the Services are corrected. Customer shall have no other remedies whatsoever in connection with said Services. With regard to materials, equipment, supplies or manufactured articles (collectively, the “Goods”) purchased or rented by Customer, Brock for its part makes no independent representations about the standard, grade or quality of any Goods manufactured and/or assembled by others and sold or rented by Brock and extends no warranties whatsoever, but only assigns to Customer all transferable warranties (and remedies extended thereunder) provided by the manufacturers of such Goods to which Brock is entitled and agrees to reasonably assist and intervene on Customer’s behalf in the enforcement of such warranties and remedies. Customer agrees to look solely to such manufacturers with regard to claims and remedies relating to such Goods. Brock warrants to Customer that all Products of its own manufacture (“Brock Products”) supplied shall conform in all respects to Brock’s published Product specifications and shall be and remain free of defects in materials and workmanship for a period of twelve (12) months following manufacture; in the event of Brock receiving notice within the warranty period of such defect Brock will, at its sole discretion, replace or repair the defective Product. The cost to repair or replace said products shall not exceed the price of the Products or extend to any ancillary or related costs not included in the original Order with respect to such products. The foregoing remedies of repair or replacement shall be the sole and exclusive obligations and responsibilities of Brock (and the sole and exclusive remedies of Customer) with respect to nonconformance of Products and/or Services. Except as expressly set forth herein and subject to the foregoing, Brock has not made, does not make, nor extend, and hereby disclaims for all purposes, any and all other remedies, representations, warranties or covenants, express or implied, including without limitation all warranties of merchantability, suitability, fitness for any particular purposes, performance, condition, design, application, use and/or durability or any warranties otherwise provided by applicable law. SCAFFOLD RENTALS : Rentals shall begin on the day of the first shipment of the scaffold materials and/or equipment (hereinafter collectively referred to as “Equipment” which includes scaffold equipment, shoring equipment, or forming equipment) and shall terminate upon the return of the Equipment in fully working, clean condition to Brock, at Customer’s cost, at Brock’s designated location. If the Equipment is missing, lost or stolen, the Equipment will continue to be rented until the replacement has been purchased and received by Brock. Any freight, insurance or customs charges related to the Equipment will be billed to Customer’s account. Customer shall at all times and at its own expense, including labor, material, parts and similar items, keep the Equipment in good repair, safe and efficient working order and shall assume all risks of damage, loss, theft, destruction or mysterious disappearance of the Equipment from any cause, with the exception of ordinary wear and tear, as determined by Brock. Customer shall, it its own expense, insure the Equipment for not less than full replacement value against all risks of loss or damage and maintain commercial general liability insurance with limits of not less than $2,000,000 for bodily injury, death or property damage, in each case naming Brock as an additional insured. The Equipment shall be assessed upon return to Brock, including inspection for damage and cleanliness and physical count for loss. All determinations made by Brock shall be final. At Brock’s sole and complete discretion, Brock shall repair, clean or replace any damaged Equipment and shall replace any lost or stolen Equipment, and in each case, all expenses will be billed to Customer’s account. Customer shall not permit any liens or encumbrances to attach to the Equipment, and Customer shall promptly take all action necessary, at its own expense, to discharge any claims, liens, charges, encumbrances or legal process. Customer agrees to erect, maintain and use the Equipment in a safe and proper manner, in conformity with all laws, regulations and ordinances pertaining thereto, and in accordance with all OSHA standards. Brock shall have no responsibility, direction or control over the manner of the erection, maintenance, use or operation of the Equipment by Customer unless agreed to in writing by Brock. The Equipment is and shall remain personal property and is the sole and exclusive property of Brock. Customer may not remove tags or labels identifying Brock as the owner of the Equipment. The Equipment shall be kept by Customer at the location where it is delivered and Brock shall at all times have the right to enter the premises where the Equipment may be located for the purpose of inspecting the Equipment. Customer shall not make any alterations, additions or improvements to the Equipment without the prior written consent of Brock. Customer shall be responsible for the cost to return the Equipment to its original condition as it is with any damage caused to the Equipment. If any such alterations, additions or improvements cause the Equipment to be damaged beyond repair, then Customer shall reimburse Brock the current purchase price as shown in Brock’s current price book for such damaged Equipment. ADDITIONAL TERMS GOVERNING RENTALS AND PURCHASE OF RENTAL GOODS : A. Damaged, Lost, Stolen or Unclean Equipment: Customer shall, at all times and at its own expense, keep the Equipment in good and operable condition, and Customer shall assume all risks of damage, loss, theft, destruction or disappearance of the Equipment from any cause, with the exception of ordinary wear and tear. The Customer shall immediately inform Brock of all losses or damage to the Equipment and shall provide Brock with the name of the Customer’s insurer, the name and contact information of the Customer’s insurance agent, a copy of any police report, all necessary proofs and complete information concerning any insurance coverage for the loss or damage. Brock, or its appointed agent, shall, in its sole judgment, determine if the damage is caused by ordinary wear and tear. The condition of the Equipment shall be assessed upon return to Brock, including inspection for damage and cleanliness, and a physical count to determine the type and amount of any missing Equipment. All determinations made by Brock shall be final. At Brock’s sole and complete discretion, Brock shall, each at Customer’s expense, repair or clean or any damaged Equipment, or replace any damaged, lost or stolen Equipment at Brock’s price list in effect at the time of return of the Equipment. Accrued rental charges or allowances for depreciation shall not offset the purchase price or cost of repairs of damaged, lost, or stolen Equipment. Customer shall not permit any claims, liens, charges, or encumbrances to attach to the Equipment, and Customer shall promptly take all action necessary, at its own expense, to discharge the same to Brock’s satisfaction. In the event Brock has to take steps to remove any such liens, Customer shall be liable for any and all costs associated, including reasonable attorney fees. B. Use of Equipment : Customer agrees to erect, maintain and use the Equipment in a safe and proper manner, in conformity with all laws, regulations and ordinances pertaining thereto, and in accordance with all OSHA standards. Brock shall have no responsibility, direction or control over the manner of the erection, maintenance, use or operation of the Equipment by Customer. It is the responsibility of Customer to fully and properly integrate the Equipment into Customer’s drawings in a manner consistent with safe practice and the overall project objective, as determined by Customer, its architects and engineers. C. Personal Property : The Equipment is and shall remain personal property and is the sole and exclusive property of Brock unless and until purchased and paid for by Customer. Customer may not remove tags or labels identifying Brock as the owner of the Equipment. D. Removal and Inspection at Location: The Equipment shall be kept by Customer at the location where it is delivered and shall not be intermingled, connected to or used with any Equipment or goods of others. At all times, Brock shall have the right to enter the premises where the Equipment may be located for the purpose of inspecting the Equipment. E. Alteration of Equipment : Customer shall not make any alterations, additions or improvements to the Equipment without the prior written consent of Brock. All alterations, additions and improvements of whatsoever kind or nature made to the Equipment shall belong to and become the property of Brock on the Term’s expiration or any earlier termination of this Agreement. If any alterations, additions or improvements are made to the Equipment which cause the Equipment to be damaged beyond repair, then Customer shall be responsible for payment of the purchase price for the damaged Equipment in accordance with Section 6A. F. Disclaimer of Warranties : BROCK MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE RENTAL EQUIPMENT, INCLUDING, BUT NOT LIMITED TO THE MERCHANTABILITY OF THE EQUIPMENT, ITS FITNESS FOR ANY PARTICULAR PURPOSE, THE DESIGN OR CONDITION OF THE EQUIPMENT, THE QUALITY OR CAPACITY OF THE EQUIPMENT, THE WORKMANSHIP OF THE EQUIPMENT, COMPLIANCE OF THE EQUIPMENT WITH THE REQUIREMENTS OF ANY LAW, RULE, REGULATION, SPECIFICATION OR CONTRACT PERTAINING TO THE EQUIPMENT, PATENT INFRINGEMENT, OR LATENT DEFECTS. CUSTOMER TAKES THE EQUIPMENT “AS IS.” G. “As Is Where Is” Sale : In instances of sale of the Rental Equipment to Customer either as an initial transaction or following rental of the Equipment, all sales are made on an “as is where is” basis with no warranties or representations whatsoever regarding the Equipment. 7. INDEMNIFICATION : (A) Brock release and indemnities . Except as provided in sections 4 through 6 above, Brock agrees to indemnify customer group from and against any and all claims arising out of, resulting from, or relating to (i) personal injury, including death or disease, affecting any person who is a member of the Brock Group (herein defined as any Brock entity, its affiliates, directors, officers, parent companies, or owners), (ii) loss or damage to property of Brock Group excluding products and rental equipment after delivery to customer and (iii) pollution or contamination which originates from Brock’s rental equipment above the surface of the earth or water while such Brock rental equipment is in Brock’s sole possession or control, including costs of clean up or remediation associated therewith arising out of or in connection with the work performed by any member of Brock Group under any order. And to the extent caused by Brock’s negligence, gross negligence, or willful misconduct. (B) Customer release and indemnities . Customer agrees to indemnify Brock Group from and against any and all claims arising out of, resulting from, or relating to (i) personal injury, including death or disease, affecting any person who is a member of the customer group; (ii) loss or damage to property of customer group including, without limitation, any loss or damage to any equipment or site being worked on by Brock and/or other contractors; (iii) loss or damage of rental equipment after delivery to customer; (iv) pollution or contamination which originates above or below the surface of the earth or water which may occur in conjunction with the work, including, but not limited to, that which may result from any fire, explosion; and/or (v) other catastrophic event at the work site, damage to any surface location and any subsurface and subsea loss or damage, and/or the cost of clean-up and remediation (vi) any loss, damage, injury and/ or death suffered or sustained by any person, party or entity in iii-v to the extent of customer group’s negligence, gross negligence, or willful misconduct. (C) Third Party Claims . Subject only to the provisions of Section (B) III-V above, each Party shall, to the full extent of its liability therefore under applicable law, be and remain responsible for, and shall Indemnify the other Party and all members of its Group from and against, any and all Claims resulting from or with respect to (i) bodily injury, disease, or death suffered by any Third Party, or (ii) damage to or loss of property suffered or sustained by any Third Party. 8. CONSEQUENTIAL DAMAGES WAIVER : (A) Notwithstanding any provision of these Terms and Conditions to the contrary, neither Party shall be liable to the other Party (or any member of the other Party’s Group) for, and each Party hereby waives and releases the other Party from and against, any and all Claims for Consequential Damages (as hereinafter defined). For purposes of the foregoing, the term “Consequential Damages” shall mean and include (i) all indirect, incidental, special, punitive, exemplary, or consequential damages or consequential losses of any nature whatsoever (whether or not foreseeable), and (ii) damages or losses, whether direct or indirect, for lost product or production, lost profit or revenue, loss of data, lost business, loss of or inability to use property and equipment, losses from business interruptions, losses resulting from failure to meet other contractual commitments or deadlines, or losses from downtime of rigs, vessels or facilities. (B) Without negating the preceding general exclusion of Consequential Damages, the Parties expressly agree that Claims with respect to the following shall NOT be considered Consequential Damages and are recoverable between the Parties: (i) Brock claims with respect to amounts due it for Work or Customer’s cancellation of an Order(s); (ii) damages for breaches of a Party’s obligations with respect to the Confidential Information (as hereinafter defined) or Intellectual Property of the other Party, or (iii) Third Party Claims with respect to which a Party is entitled to indemnification under these Terms and Conditions. 9. LIMITATION OF LIABILITY : Any liability of Brock, save for its insurance and indemnity requirements herein, shall be strictly limited to the price of the Order giving rise to a Claim or Claims. 10. DELAYS/FORCE MAJEURE : The consequences, direct or indirect, of labor troubles, Acts of God (including hurricanes, tornadoes, earthquakes, tsunamis, landslides, fires, or floods), accidents, hostilities, shortage of transportation, failure or suspension or curtailment of production due to shortage of labor or supply of raw materials, or other economic factors, pandemics, government acts or requirements and any and all like or different causes beyond the control of the Parties hereto shall excuse performance, except payment by either party to the extent by which performance is prevented thereby. With respect to any delays caused by failure of Customer to furnish timely information or approve or disapprove of Brock’s Work promptly, delays caused by faulty performance by Customer or by contractors of any level, and any and all like or different causes beyond the control of Brock, Brock shall not responsible for any damages and shall not be deemed to be in default of this Agreement. A Party claiming Force Majeure must provide written notice to the other Party as soon as reasonably possible. If the Work is delayed for a period of more than six (6) months, all prices for future Work shall be subject to renegotiation. 11. SUSPENSION/TERMINATION OF SERVICES : In the event Customer fails to make payments when due in accordance with the payment terms herein, Brock may suspend performance of and/or terminate Work upon seven (7) calendar days’ prior written notice and may remove any and all materials and/or equipment from the job site. Brock shall have no liability whatsoever to Customer for any costs or damages as a result of such suspension or termination. Any suspension shall remain in effect until all unpaid invoices are paid in full. In the event Customer terminates or cancels the Work, Brock shall be given seven (7) calendar days’ prior written notice and shall be compensated for Work provided, including any Goods ordered by Brock for Customer, up to the date of the termination or cancellation. In the event this Agreement is suspended or terminated for any reason, Brock shall be compensated for all Work performed or in progress, demobilization costs, including without limitation, all costs associated with the disassembly and removal of materials and/or scaffolding at Brock’s standard time and materials rates then currently in effect. 12. CHANGE ORDERS : Any Customer request for changes in the scope and/or scheduling of the Work to be provided under an Order(s) must be given in the form of a written change order (“Change Order(s)”). Upon Brock’s receipt of a Change Order(s), the Parties shall negotiate in good faith the terms to be included therein. Each Change Order(s) shall reference the original Order(s) and shall specify (i) the changes in the scope or timing of the Work to be provided under the affected Order(s), and (ii) the adjustment (if any) to be made to the fees and other amounts due Brock in connection therewith,and shall be executed on behalf of each Party by an authorized person. If the Parties are unable to agree upon or fail to timely execute a Change Order(s) with respect to orally requested changes to the Work, Brock shall be entitled to permanently suspend the Work and cancel the affected Order(s), and Customer shall pay Brock for all Work performed prior to the date of cancellation, as well as any applicable mobilization or demobilization charges or other costs incurred by Brock. 13. ENFORCEMENT : The Parties agree that the exclusive forum for the adjudication of any controversy or dispute relating to these conditions, this Agreement, and/or the Work furnished by Brock shall be the state or federal courts located in Harris County, State of Texas, and both Parties hereby consent to the personal jurisdiction of such courts for all such purposes. This Agreement shall be governed by and construed in accordance with the laws of the State of Texas without regard to the choice of law rules, statutes, or laws thereof. Should any provision hereof be held invalid or illegal, such holding shall not affect the validity of the remaining provisions. Acceptance of the Work or Brock’s offer to provide the Work is expressly limited to the terms and conditions contained herein and any additional or different terms of Customer are hereby rejected. These terms and conditions constitute the final, complete and exclusive agreement between Brock and Customer, and no agreement or understanding, oral or written, in any way purporting to modify or negate these terms and conditions, whether contained in Customer’s purchase order, acknowledgment, or in any other of Customer’s forms or elsewhere, shall be binding, unless agreed to in writing and executed by both Parties. 14. REMEDIES : The rights and remedies reserved to Brock shall be cumulative and additional to all other remedies provided by law or in equity. Brock shall be entitled to recover all costs, expenses and attorneys’ fees in the enforcement or defense of any rights (including any collection actions) hereunder. 15. INDEPENDENT CONTRACTOR . Each party is, and shall perform this Agreement as, in independent contractor, and as such, shall have and maintain complete control over all of its employees, agents and operations. Neither Brock nor anyone employed by it or its subcontractors shall be deemed to be, or act or purport to act as, the agent, representative, employee or servant of Customer. 16. WORK IN LOUISIANA . Only and strictly with regard to claims, demands, suits and other liabilities by employees of Brock against Customer or Owner, in connection with Work performed in the State of Louisiana, the Parties acknowledge that performance of any Work by Brock constitutes their recognition and agreement that a statutory employer relationship as envisioned by La. R.S. § 23:1061(A), as amended by Act 315 of 1997, exists between Brock and Customer. Such statutory employer relationship applies to Brock’s direct, borrowed, special or statutory employees. Further, the Parties acknowledge that the Work to be performed under this Agreement is an integral part of, or essential to, the ability of Customer to generate its own goods, products or services. 17. MISCELLANEOUS : Time is of the essence as to all time periods stated herein, except delivery or completion dates which are estimated. All captions are for convenience only and do not constitute a part of these conditions. Customer represents and warrants to Brock that Customer has not ceased to pay its debts in the ordinary course of business, that it can pay its debts as they become due, and that it is and continues to be solvent within the meaning of the Federal Bankruptcy Act. Brock and Customer shall perform hereunder strictly in conformance with and subject to (in their present form or as hereafter amended) all applicable laws and governmental orders, rules and regulations of the United States of America and of any State or municipality thereof. The Brock companies are separate legal entities and are not entering into this Agreement as joint venturers, partners or otherwise in any capacity that would render them jointly or jointly and severally liable hereunder. Further, no Brock entity is a guarantor or surety for any other Brock entity. Rather, each Brock entity shall be liable hereunder only for Work performed by it hereunder. 18. INSURANCE : The insurance required will be in accordance with terms and conditions set forth in Insurance Requirements Exhibit “A”, and all insurance shall be provided by carriers with ratings with minimum AM Best rating of “A-“. 19. WAIVER OF TERMS: No waiver by Brock of any of the terms, provisions, or conditions of these Terms and Conditions shall be effective unless expressly stated in a writing signed by an authorized officer of Brock. Brock’s failure to enforce any term, provision or condition of these Terms and Conditions shall in no manner affect its right to enforce the same at a later time, and the waiver by Brock of any breach of any term, provision or condition of these Terms and Conditions shall not be construed to be a waiver by Brock of any subsequent or succeeding breach of such term, provision or condition or of any other term, provision or condition hereof. EXHIBIT “A” Insurance Requirements for Brock and Customer Workers Compensation: I) State: II) Applicable Federal (e.g. Longshoreman’s): III) Employer’s Liability: Statutory Statutory $1,000,000 per Occurrence Comprehensive General Liability (including coverage for Products, Completed Operation, Independent Contractors/Contractors Protective, Contractual Liability): $2,000,000 per Occurrence, $4,000,000 aggregate Comprehensive Automobile Liability: Combined single limit of $2,000,000 If the contract involves work with hazardous material: Pollution Liability Insurance $5,000,000 per Occurrence A Certificate of Insurance shall be issued to the other Party upon request.

REJOIGNEZ NOTRE ÉQUIPE DE PLUS DE 15 000 FORTS Travaillez avec les meilleurs EN UN COUP D'OEIL 25 + 75 + 15,000 + ANNÉES ÉTABLI EMPLOYÉ 500 + INSTALLATIONS À TRAVERS AMÉRIQUE DU NORD MILLION HOURS WORKED ANNUALLY IN NORTH AMERICA Choisissez Brock Quand les résultats comptent ! Culture de sécurité Personnes | Direction Technologie et innovation Portefeuille de services Expérience | Compétence Processus et procédures Services sur site Notre approche de tout projet commence par l'élaboration d'un plan qui met l'accent sur la fourniture à nos clients d'une excellence d'exécution grâce à la création d'une structure de coûts et d'un calendrier de production optimisés, ce qui est possible grâce à notre combinaison unique de protocoles de sécurité établis, de processus éprouvés et procédures, orientation vers la satisfaction du client, ressources abondantes, mandat de qualité de premier passage et volonté de dépasser les attentes de nos clients. Notre objectif ultime est de fournir des ressources et des solutions qui apportent de la valeur et augmentent la satisfaction des clients sur les projets de construction et de redressement, ainsi que sur les activités de maintenance spécifiques au site. Cliquez ci-dessous pour en savoir plus sur nos services. DOUX - ARTISANAT MÉCANIQUE GÉNÉRALE SERVICES TECHNIQUES SERVICES DE SÉCURITÉ SERVICES DE FABRICATION Strategically Located Across North America Les opérations de Brock fournissent à la fois des services multi-métiers spécialisés au mérite et aux syndicats aux États-Unis et au Canada. Brock s'est bâti une réputation centrée sur la confiance, la responsabilité, l'intégrité et la passion pour ce que nous faisons. Nous nous engageons à entretenir des relations transparentes avec nos clients et sommes fiers d'être la force motrice qui transforme notre industrie grâce à des technologies innovantes et disruptives. Brock aujourd'hui Dans l'actualité Our Customers

BSL SE Rental Agreement BROCK SERVICES, LLC RENTAL AGREEMENT TERMS ALL RENTALS ARE GOVERNED SOLELY BY THE TERMS AND CONDITIONS HEREIN, NO TERMS PROVIDED BY CUSTOMER, INCLUDING ANY TERMS THAT MAY BE ATTACHED TO A PO OR REQUEST FOR BID, WILL ALTER IN ANY WAY THE TERMS OF RENTAL FROM BROCK SERVICES, LLC AND ITS AFFILIATES. Rental Term: The rental term (the “Term”) shall begin on the day of the first shipment of the materials and/or equipment including, without limitation, scaffold equipment, shoring equipment, and forming equipment (collectively the “Equipment”) and shall terminate upon the return of the Equipment in good and operable condition to BROCK, at Customer’s cost, at SCAFFSOURCE’s designated location. Upon return, Customer shall band the Equipment in a manner similar to the way it was delivered to Customer. If the Equipment has to be repaired or cleaned to return it to a fully working state, or if the Equipment is missing, lost or stolen, the Term will continue until the Equipment has been returned to good and operable condition or has been replaced at Customer’s cost. Customer shall, at its own expense, be responsible for any freight, insurance or customs charges related to the Equipment incurred during the Term. Price and Payment: The rental price during the Term (the “Price”) shall be as set forth in the schedule attached to the Customer proposal or to this Agreement. The parties agree that the Price may be adjusted from time to time to reflect changes in number of pieces of Equipment on rent or for additional costs incurred by BROCK, as appropriate. In the event of omission of a rental schedule provided to Customer, the Price shall be BROCK’s published rental prices which can be found at (INSERT LINK TO ONLINE PRICING HERE), or as provided to Customer in a written quotation or proposal prior to execution of this Agreement. Payments will be due thirty (30) days after the date of each invoice. Customer further agrees to pay interest on any unpaid rent and other invoiced charges beginning on the date payment is due, compounded annually, at an interest rate which is the lesser of: (i) one and a half percent (1.5%) per month, or (ii) the highest rate permitted by law. Should BROCK have to resort to an outside vendor, including attorneys, to collect on unpaid amounts as described above, Customer agrees to pay BROCK all reasonable costs, charges, expenses, agency fees, and reasonable attorneys’ fees expended or incurred as a result thereof. Sales and Rental Taxes: Prices quoted do not include any applicable state, local, or foreign sales tax, use tax, rental tax, contractor’s tax, excise tax. VAT/GST/HST/PST/QST or any other applicable taxes required and/or levied by any taxing authority. BROCK is required by law to charge all applicable sales and rental taxes and will add said taxes to the invoice as a separate line item to be included in the total amount to be paid by the Customer. Customer will be responsible for payment of any and all applicable taxes and will indemnify BROCK from any and all such taxes, penalties, or interest assessed against BROCK. BROCK shall accept any and all valid tax exemption certificates provided by Customer and will adjust tax charges accordingly. In the event that a valid direct pay certificate is provided, Customer shall provide BROCK with proof of such payment semi-annually. For scaffolding agreements in Mississippi, USA or states with similar tax laws, the scaffolding rental costs will be on a separate purchase order from any services, the Customer understands that the Customer is renting scaffolding, and the scaffolding is not part of the contractor’s services, and the scaffolding rental is therefore not subject to the contractor’s tax. INSPECTION: CUSTOMER SHALL INSPECT THE EQUIPMENT, PRIOR TO USE, TO VERIFY THAT CUSTOMER RECEIVES THE CORRECT AMOUNT OF EQUIPMENT AND THAT THE EQUIPMENT IS IN GOOD AND OPERABLE CONDITION. USE OF THE EQUIPMENT BY CUSTOMER SHALL BE DEEMED TO BE AN ACCEPTANCE AND ACKNOWLEDGMENT BY CUSTOMER THAT THE EQUIPMENT WAS IN GOOD AND OPERABLE CONDITION WHEN DELIVERED OR MADE AVAILABLE BY BROCK TO CUSTOMER. IF CUSTOMER FAILS TO NOTIFY BROCK OF ANY ISSUES WITH THE EQUIPMENT WITHIN 48 HOURS OF DELIVERY, THE EQUIPMENT SHALL BE DEEMED ACCEPTED BY CUSTOMER AND FREE FROM ANY DEFECTS. Damaged, Lost, Stolen or Unclean Equipment: Customer shall, at all times and at its own expense, keep the Equipment in good and operable condition, and Customer shall assume all risks of damage, loss, theft, destruction or disappearance of the Equipment from any cause, with the exception of ordinary wear and tear. The Customer shall immediately inform BROCK of all losses or damage to the Equipment and shall provide BROCK with the name of the Customer’s insurer, the name and contact information of the Customer’s insurance agent, a copy of any police report, all necessary proofs and complete information concerning any insurance coverage for the loss or damage. BROCK, or its appointed agent, shall, in its sole judgment, determine if the damage is caused by ordinary wear and tear. The condition of the Equipment shall be assessed upon return to BROCK, including inspection for damage and cleanliness, and a physical count to determine the type and amount of any missing Equipment.. All determinations made by BROCK shall be final. At BROCK’s sole and complete discretion, BROCK shall, each at Customer’s expense, repair or clean or any damaged Equipment, or replace any damaged, lost or stolen Equipment at BROCK’s price list in effect at the time of return of the Equipment. Accrued rental charges or allowances for depreciation shall not offset the purchase price or cost of repairs of damaged, lost, or stolen Equipment. Customer shall not permit any claims, liens, charges, or encumbrances to attach to the Equipment, and Customer shall promptly take all action necessary, at its own expense, to discharge the same to BROCK’s satisfaction. In the event BROCK has to take steps to remove any such liens, Customer shall be liable for any and all costs associated, including reasonable attorney fees. Use of Equipment: Customer agrees to erect, maintain and use the Equipment in a safe and proper manner, in conformity with all laws, regulations and ordinances pertaining thereto, and in accordance with all OSHA standards. BROCK shall have no responsibility, direction or control over the manner of the erection, maintenance, use or operation of the Equipment by Customer. It is the responsibility of Customer to fully and properly integrate the Equipment into Customer’s drawings in a manner consistent with safe practice and the overall project objective, as determined by Customer, its architects and engineers. Personal Property: The Equipment is and shall remain personal property and is the sole and exclusive property of BROCK unless and until purchased and paid for by Customer. Customer may not remove tags or labels identifying BROCK as the owner of the Equipment. Removal and Inspection at Location: The Equipment shall be kept by Customer at the location where it is delivered and shall not be intermingled, connected to or used with any Equipment or goods of others. At all times, BROCK shall have the right to enter the premises where the Equipment may be located for the purpose of inspecting the Equipment. Alteration of Equipment: Customer shall not make any alterations, additions or improvements to the Equipment without the prior written consent of BROCK. All alterations, additions and improvements of whatsoever kind or nature made to the Equipment shall belong to and become the property of BROCK on the Term’s expiration or any earlier termination of this Agreement. If any alterations, additions or improvements are made to the Equipment which cause the Equipment to be damaged beyond repair, then Customer shall be responsible for payment of the purchase price for the damaged Equipment in accordance with Section 5. Indemnification: CUSTOMER AGREES TO RELEASE, PROTECT, INDEMNIFY, HOLD HARMLESS AND DEFEND BROCK, ITS PARENT, SUBSIDIARIES AND AFFILIATES AND EACH OF THEIR RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, AGENTS, CONTRACTORS OF ANY TIER, REPRESENTATIVES, AND CONSULTANTS (“BROCK PARTIES”) FROM AND AGAINST ANY AND ALL CLAIMS, DEMANDS, SUITS, LIENS, DAMAGES, CAUSES OF ACTION, JUDGMENTS, LOSSES, ATTORNEYS AND EXPERT FEES, AND LIABILITIES OF ANY NATURE WHATSOEVER ARISING IN ANY MANNER, DIRECTLY OR INDIRECTLY, OUT OF OR IN CONNECTION WITH OR INCIDENTAL TO THE RENTAL OR SALE OF THE EQUIPMENT (INCLUDING, BUT NOT LIMITED TO, CUSTOMER’S USE OR APPLICATION OF OR OPERATION OF THE EQUIPMENT AND ANY BODILY INJURY, DEATH, OR PROPERTY DAMAGE OF ANY THIRD PARTY OR ANY EMPLOYEE OF CUSTOMER). IT IS THE INTENT OF THE PARTIES THAT THE INDEMNITIES AND RELEASES PROVIDED FOR HEREIN SHALL BE BROADLY CONSTRUED AND SHALL APPLY REGARDLESS OF BROCK’S FAULT, STRICT LIABILITY, BREACH OF WARRANTY, STATUTORY LIABILITY OR ACTUAL OR ALLEGED NEGLIGENCE. THIS INDEMNITY AGREEMENT IS INTENDED TO INDEMNIFY BROCK AGAINST THE CONSEQUENCES OF ITS OWN NEGLIGENCE AND FAULT. Disclaimer of Warranties: BROCK MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING, BUT NOT LIMITED TO THE MERCHANTABILITY OF THE EQUIPMENT, ITS FITNESS FOR ANY PARTICULAR PURPOSE, THE DESIGN OR CONDITION OF THE EQUIPMENT, THE QUALITY OR CAPACITY OF THE EQUIPMENT, THE WORKMANSHIP OF THE EQUIPMENT, COMPLIANCE OF THE EQUIPMENT WITH THE REQUIREMENTS OF ANY LAW, RULE, REGULATION, SPECIFICATION OR CONTRACT PERTAINING TO THE EQUIPMENT, PATENT INFRINGEMENT, OR LATENT DEFECTS. CUSTOMER TAKES THE EQUIPMENT “AS IS.” “As Is Where Is” Sale: In instances of sale of the Equipment to Customer either as an initial transaction or following rental of the Equipment, all sales are made on an “as is where is” basis with no warranties or representations whatsoever regarding the Equipment. Limitation of Damage: UNDER NO CIRCUMSTANCES, WHETHER ARISING IN CONTRACT, TORT (INCLUDING NEGLIGENCE), EQUITY OR OTHERWISE, WILL BROCK BE RESPONSIBLE FOR LOSS OF USE, LOSS OF PROFIT, INCREASED OPERATING OR MAINTENANCE EXPENSES, OR ANY SPECIAL, PUNITIVE, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND. Insurance: Customer, at its own expense, shall (i) insure the Equipment, with an insurance company acceptable to BROCK, and valid in any jurisdiction that the Equipment is shipped to or used, for not less than full replacement value against all risks of loss or damage from every cause whatsoever, naming BROCK as loss payee, (ii) maintain commercial general liability insurance, with an insurance company acceptable to BROCK, naming BROCK as an additional insured in a form satisfactory to BROCK, with limits of not less than $2,000,000 for bodily injury, death or property damage, for any and all claims for bodily injury or property damage arising out of the use of the Equipment, (iii) provide BROCK with (a) a certificate of insurance listing the required policies, (b) a copy of the additional insured endorsement, (c) an endorsement stating that the insurance provided hereunder is primary, and other insurance available to BROCK is excess and noncontributing, and (d) includes a Separation of Insureds clause or endorsement (e) if requested by BROCK, true and correct copies of any such applicable policies, (iv) ensure that Customer’s property and general liability policies contain a waiver of subrogation in favor of BROCK and that the certificate of insurance reference the waiver of subrogation, and (v) notify BROCK immediately within 24 hours after the occurrence of any claim, loss, damage or injury relating to the Equipment. Any deductibles or self-insured retention limits cannot be over $50,000 without written approval by BROCK, and all deductibles or self-insured retention limits are the responsibility of Customer. Upon Customer’s failure to provide any of the foregoing identified in (iii) above, BROCK may obtain such insurance coverage at Customer’s expense, and Customer shall immediately reimburse BROCK for any costs incurred by BROCK. The proceeds of such insurance, at the option of BROCK, shall be applied (a) toward the replacement, restoration, or repair of the Equipment, or (b) toward payment of Customer’s obligations under this Agreement. BROCK shall have no duty to Customer or its insurers to review any certificates of insurance or copies of insurance endorsements furnished to BROCK or determine whether the certificates or endorsements comply with the insurance related portion of this Agreement. A failure of BROCK to detect that Customer has not submitted certificates, endorsements or is otherwise not in compliance with the insurance related provisions of this Agreement shall not be considered a waiver of BROCK’s rights under such insurance related provisions. Events of Default: The occurrence of any of the following shall constitute an “event of default” under this Agreement: (a) Customer fails to pay the Price or any other sum due under this Agreement within ten (10) days after such sum is due; (b) Customer fails to observe or perform any covenant, obligation, or agreement contained herein; (c) Customer becomes insolvent, becomes the subject of any bankruptcy proceeding, or a receiver is appointed for Customer or any of the assets of Customer; (d) any lien or encumbrance shall attach to or be filed against any Equipment rented by Customer; (e) Customer fails to keep the Equipment in good and operable condition; or (f) the Equipment is removed from the location where delivered, other than for return to BROCK. Remedies: If Customer is in default under this Agreement, without notice to or demand on Customer, BROCK may (a) take possession of the Equipment wherever found, with or without legal process, and for this purpose, BROCK and/or its agents may enter upon any premises of or under the control or jurisdiction of Customer or any agent of Customer, without liability for suit, action or other proceeding by Customer (any damages occasioned by such repossession being hereby expressly waived by Customer) and remove the Equipment therefrom; (b) declare the entire amount of all sums, due, based on the Term or any estimated rental period under this Agreement and/or terminate this Agreement, including all expenses and costs incurred by BROCK in enforcing its rights in (a), immediately payable; or (b) pursue any other remedy at law or in equity. All such remedies are cumulative and may be exercised concurrently or separately. In the event of any action at law or in equity in relation to this Agreement, BROCK shall be entitled to recover its reasonable attorneys’ fees and costs. Non-Delivery or Delay: BROCK reserves the right, without penalty or obligation, to suspend shipments of Equipment in the event of strikes, shortages of Equipment, labor problems, transportation interruption, accidents, fires, floods, acts of God, government action, pandemic, or other events beyond the control of BROCK. Any suspension of performance by reason of this provision shall be limited to the period during which such cause or failure exists. Assignment: Customer may not assign this Agreement or any rights under this Agreement without the prior written consent of BROCK. BROCK may assign this Agreement, in whole or in part, without notice to Customer. Subject to the foregoing, this Agreement inures to the benefit of and is binding on the parties and their successors and assigns. Severability and Waiver: If any provision of this Agreement, or part thereof, is found to be void, invalid or unenforceable, the remaining provisions shall nevertheless be binding with the same force and effect as though the void or invalid portions were removed. The failure of BROCK to enforce any provision of this Agreement shall not be construed as a waiver or limitation of its right to subsequently enforce and compel strict compliance with every provision of this Agreement. Notice: Any written notice or demand shall be given by registered or certified US Mail, return receipt requested, overnight delivery service regularly providing proof of delivery or personal delivery at the address specified above. Time: Time is of the essence with respect to all of Customers obligations under this Agreement. Choice of Law and Venue: The rights, duties and obligations of the parties hereunder shall be governed and construed in accordance with the laws of the State of Texas, without regard to any laws to the contrary including but not limited to any choice of law rules or any conflict of laws rules or laws which would refer its interpretation to the laws of another jurisdiction. Should BROCK employ an attorney to (i) enforce any of the provisions hereof, (ii) protect its interest in any matter arising under this Agreement, including in connection with taking possession of the Equipment and repairing and restoring the Equipment to the condition in which it was originally delivered to Customer, (iii) collect damages for the breach of this Agreement, or (iv) prosecute or defend any suit referring or relating to this Agreement, Customer agrees to pay BROCK all reasonable costs, charges, expenses, and reasonable attorneys’ fees expended or incurred as a result thereof. Venue for any court action taken by or against BROCK shall be in the state or federal courts located in Houston, Harris County, Texas, and both parties hereby consent to the personal jurisdiction of such courts for all such purposes. The U.N. Convention of Contracts for the International Sale of Goods shall not govern nor apply to this Agreement. Entire Agreement and Amendment: This Agreement supersedes any and all prior offers, agreements, or understandings and comprises the entire lease and contract between the parties, and there are no understandings, representations, warranties or promises, verbal or otherwise, pertaining to this Agreement or to the Equipment, which are not incorporated herein. Compliance with Laws: Customer shall comply with, and adhere to, strictly in conformance with all applicable laws and regulations, including, without limitation, those pertaining to environment, health and safety, economic sanctions laws, trade, and export control including as applicable, those of the United States. Rent Ready Returns: Rental returns expectations are such that Equipment is to be received back to BROCK in the manner in which it was shipped out. Failure to do so may result in additional costs at Customer’s expense. Miscellaneous: All captions are for convenience only and do not constitute a part of these conditions. Customer represents and warrants to BROCK that Customer has not ceased to pay its debts in the ordinary course of business, that it can pay its debts as they become due, and that it is and continues to be solvent within the meaning of the Federal Bankruptcy Act. BSL SE Contract Agreement RENTAL TERM: Rental term is a minimum of 28 days (unless otherwise stated) and starts the day Leased Equipment is picked up by Lessee or is delivered to or for the Lessee. Upon pick up or delivery, Customer shall comply with the terms and conditions of the rental as set out on our website and are incorporated and made of part of this agreement by reference. Click on the link below: [Insert Link] This Contract Services Agreement (“Contract”), together with any printed conditions on Brock Services, LLC (“BSL", or "Brock”) invoice(s) and product documentation, shall constitute the entire and final agreement between Brock and the person/entity identified on Page 1 as the customer (“Customer”). All prior negotiations are merged herein. Brock shall furnish the labor and equipment as stated on Page 1 to Customer. In exchange, Customer shall pay Brock as stated on Page 1. The contract price as stated on Page 1 has been calculated based on current market rates as of the date of this contract. Should prices of this equipment increase after 30 days from the date of this contract and before erection, Brock reserves the right to increase rates to the then current market rate. Brock’s work is to be performed during regular working hours, Monday through Friday. Brock shall not be responsible for delays caused by acts of the Customer, labor disputes, fire, unusual delay in deliveries, abnormal or adverse weather conditions nor reasonably foreseeable or any other acts outside its control, or other unavoidable casualties, or any order issued by federal, state or local government imposing limitations on the progress of the work. Brock's pricing excludes any special wage or labor rate determination or participation in OCIP/CCIP unless otherwise stated. “Change Orders” : A signed agreement must be submitted prior to Brock performing any work outside the scope of work as stated in this Contract. It is understood that this work is to be performed during regular working hours, Monday through Friday, unless otherwise arranged and that any delays in work caused by others or additional work requested, which is not originally included in the Scope of Work, are subject to additional charges. All labor charges are invoiced at Brock's current hourly billing rate. The Customer shall: Provide a clean and unobstructed work area that is free of debris, ready for scaffold, and is capable of supporting the live and dead load of the scaffold. Maintain awareness of the scaffold load capacities. Provide adequate parking for Brock to deliver, pick up, load and unload scaffolding equipment. Provide a dedicated lay down area with a clear and direct passageway to area where work is to be performed. Provide a work area that is safe and in compliance with OSHA/EM385 specifications regarding, but not limited to, illumination, ventilation, excavation and/or trench shoring, any elevated work platforms, and to assure the safety of Brock's employees. Provide necessary electrical power and lighting to safely perform work. If applicable, provide at no cost to Brock (1) access to the site; (2) mechanical means to unload, stage and load equipment; (3) site specific orientation or safety training, (4) site specific safety equipment that exceeds OSHA regulations. Provide at no cost to Brock: an operator, rigger and signaler if a crane is used to lift or lower equipment. Customer shall provide the crane's maximum capacity. If traffic flaggers are required, it will be an added cost to the customer. Accept that the interruption of crane, forklift or elevator shall be as minimal as possible to avoid downtime, which may result in an additional charge to the customer. Maintain security at the job site to prevent theft or damage to any scaffolding or other equipment and to prevent unauthorized access to any such scaffolding or equipment. Supply all applicable permits or applications required to allow Brock to proceed with the work unencumbered. Notify Brock immediately upon becoming aware of existing or potential hazardous or toxic material on site. Be responsible for costs related to 3rd party drug screens. At all times, maintain and use scaffolding in accordance with OSHA regulations, applicable state and local laws, and the manufacturer's safety rules and instructions. Customer is responsible for knowing the laws, rules, and guidelines associated with the scaffolding, equipment, and materials they are using. Verify the existing structure will support the scaffold loads. Arrange with the utility authority for all necessary safeguards, notifications, and process lockouts prior to labor being performed. Have a representative on site to sign for the acceptance of the equipment, count and inspect the completed work performed, and sign safety inspection form(s) provided by Brock. Inspect the scaffold daily or before each shift as required by OSHA regulations. Only allow properly trained and otherwise qualified person(s) to use the scaffolding. Keep all unauthorized persons off the scaffolding during its erection and dismantling. Provide training to all users of scaffold. Brock may require proof of training (suspended scaffold). Ensure all users have adequate fall protection and a rescue plan in place. Assure that all users have received, read, and understand the codes of safe practices. Be responsible for any missing equipment if the customer dismantles the scaffold, for which Brock will charge Customer the replacement cost. Be responsible for any damage to equipment beyond reasonable wear and tear. Be responsible for any excessive downtime resulting from the removal of scaffold ties and/or patchwork needed, which will result in an additional charge to the customer. Provide floor and roof protection, if applicable. Provide falling object protection, if applicable. Payment to be in US funds within 30 days of date of invoice and no retainage to be withheld. Any balances not timely paid are subject to a service charge of 1.5% per month on the unpaid balance. All deposits are non-refundable. Customer agrees to pay a return check fee of $35 plus any bank fees, should a check be returned by Brock's bank for any reason. All claims for nonconforming or defective goods must be in writing and reported within three (3) days of delivery. Any resulting adjustment will be solely at the discretion of Brock. Brock warrants that all scaffolding will be built in accordance with OSHA subpart L (CFR 1926.450, 451, 451(d), 452, 454) requirements with a light duty load rating of 25 pounds per square foot. Brock makes no other warranty, express or implied, including implied warranties of merchantability and/or fitness for a particular purpose. This warranty excludes any nonconformity or defect caused by abuse, modification not executed by Brock; improper or insufficient maintenance; improper operation; or damage other than normal wear and tear under normal intended usage. Customer's exclusive remedy for breach of this warranty shall be repair or replacement of defective materials. A “Letter of Intent” or “Notice to Proceed” is not accepted for commencement of any work under this Contract. Work will begin only after this Contract has been signed and all terms and conditions have been agreed upon. To the fullest extent provided by law, Customer agrees to indemnify, save and hold harmless, promptly accept tender of defense, and immediately reimburse Brock, including its agents and employees, from all liabilities, contingent or fixed claims, losses, demands, liens, suits, judgments, costs or reasonable attorney’s fees and costs of litigation including expert witness and consultant fees, whether or not testimony is taken, incurred, bonds posted, or actions of any kind for damages of any kind arising from any and all claims asserted to be related to this Contract, on site or off site, proximately caused by the negligent acts or omissions of Customer, its agents, employees, lower-tier Customers, or anyone for whom they are responsible. Any notice under this Contract shall be in writing and given by email transmission with read receipt, and in addition shall be given by certified mail return receipt request or nationally recognized overnight carrier. Said notice will be effective upon confirmation of delivery of the email transmission and delivery to the U.S. Postal Service for mailing by certified mail return receipt request or delivery to a nationally recognized overnight courier. This Contract is governed by the laws of Florida. If any provision of this Contract is held invalid or unenforceable, all other provisions shall continue in full force and effect. This contract shall be binding upon each of the parties, their heirs, executors, administrators, successors, and assigns.

Brock Services LLC 777 N. Eldridge Parkway, Houston, TX 77079, Suite 900 Finance: 832-862-4243 New Customer Credit Application - For Florida branches only The undersigned company is applying for credit with Brock and agrees to abide by the general terms and conditions as stated below. Date of Application: Company Name Business Address: Contact Person: Phone: Email Have you ever had credit with us before? * Yes No Amount of Credit Requested in US$: If yes, under what name? Quote Info: Quote # Amount Select Type Sales Rep Trade Reference #1 Company Name: Contact Person: Address: Phone: Email Trade Reference #2 Company Name: Contact Person: Address: Phone: Bank Reference Bank Name: City: Phone: Email Acct #: Contact Person: Email I have read and agree to the terms and conditions stated: Authorized Signature: Clear Date: Printed Name: Title: All sales, services, and rentals are subject solely to the Brock Services LLC Terms and Conditions which can be found at www.brockgroup.com/brock - services-rental-terms and are incorporated herein as if fully set forth and shall not be altered or amended by any terms and conditions provided by Customer, including any terms and conditions linked to or provided in conjunction with Customer’s PO, unless Brock and Customer have entered into a separate, written, master services agreement, supply agreement, equipment rental agreement, or other contract which governs the work quoted herein. CUSTOMER BILLING INFORMATION City: ZIP Code: AP Contact Name : Email address for invoices: If you will be using a Louisiana resale certificate, please provide your NAICS codes. State: Billing Address: Phone Number: SALES TAX: Will you be submitting either a resale certificate or direct pay permit? * Yes No Applicable Tax Certificates Upload File Submit

Fabrication de métaux La division Brock Services Metal Fabrications offre un savoir-faire industriel de qualité depuis plus de 40 ans. Nos capacités incluent le soutien aux projets de construction, de maintenance et de réparation à grande échelle. Services mis en avant La division de fabrication de métaux fabrique et soude des alliages d'acier au carbone, d'aluminium, d'acier inoxydable et de nickel pour les industries du traitement chimique, de l'énergie, de l'énergie et du pétrole. Les services incluent Soudage Poinçonnage du métal Coupe et partage de métaux Moussage et pliage de métal Personnalisations Installation Capacités et expertise L'usine de Port Allen, en Louisiane, comprend plus de 25 000 pieds carrés de zone de fabrication dédiée abritant diverses machines CNC, capables de fabriquer une grande variété de pièces de qualité. L'espace comprend également les équipements suivants : Poinçonneuse à métal CNC à grande vitesse ; Coupeur de plasma ; Presses plieuses hydrauliques ; Cisailles 10′ et 6 rouleaux.

Scaffolding Installers | Insulation Companies | Industrial Painting Near Joliet | Lead and Asbestos Abatement | Fireproofing Contractors | Commercial Rope Access | Sandblasing Services Near Joliet | Refractory Services Near Joliet | 3D Scaffold Design | ASME PCC2 | Industrial Coatings | Fabrication Specialists | Industrial Insulation Blankets | Brock Industrial est une entreprise de services syndicaux de premier plan fournissant des services d'artisanat et de maintenance spécialisés à des industries clés à travers les États-Unis. Nous nous engageons à offrir le service et les solutions les plus sûrs et de la plus haute qualité à nos clients. Nous embrassons notre héritage syndical et nous considérons comme des partenaires de nos clients, de nos membres et des communautés dans lesquelles nous opérons. Brochure générale Contactez-nous! Capacités et expertise Motivé par un engagement envers l’excellence de l’exécution, Brock Industrial combine des capacités de résolution de problèmes et une expertise technique pour garantir les résultats requis. En livrant des projets en toute sécurité, dans les délais et dans les limites du budget, Brock Industrial renforce l’avantage concurrentiel stratégique et la rentabilité nette de ses clients. échafaudage Isolation Réduction Revêtements sur place et en magasin Réfractaire Ignifugation Fabrication de métaux et de couvertures Expérience mise en avant Installation de traitement pétrochimique Travaux d'échafaudage, d'isolation, de peinture et de réduction pour soutenir l'entretien quotidien continu, les petits et grands capitaux et les travaux de redressement. Centrale électrique à cycle combiné de Greenfield Brock a été retenu pour fournir des services d’échafaudage et d’isolation pour cette nouvelle installation située dans la région sud-ouest du Connecticut. Installation pétrochimique de Greenfield Brock a fourni des services d'isolation à l'appui de la construction d'une nouvelle installation pétrochimique de craquage d'éthylène située dans la vallée de la rivière Ohio, au nord de Pittsburgh.

Electricité et instrumentation Texte de l'espace réservé Capacités Texte de l'espace réservé Les services incluent ... ... ... ... Espace réservé Texte de l'espace réservé Espace réservé Texte de l'espace réservé

Toiture Il s'agit d'un texte de remplissage. Plus d’informations sont nécessaires pour construire cette section. Contactez David Waterman ou Sydney Wallis. Filler Il s'agit d'un texte de remplissage. Plus d’informations sont nécessaires pour construire cette section. Contactez David Waterman ou Sydney Wallis. Remplisseur Il s'agit d'un texte de remplissage. Plus d’informations sont nécessaires pour construire cette section. Contactez David Waterman ou Sydney Wallis. Il s'agit d'un texte de remplissage. Plus d’informations sont nécessaires pour construire cette section. Contactez David Waterman ou Sydney Wallis. Filler Il s'agit d'un texte de remplissage. Plus d’informations sont nécessaires pour construire cette section. Contactez David Waterman ou Sydney Wallis. Filler Il s'agit d'un texte de remplissage. Plus d’informations sont nécessaires pour construire cette section. Contactez David Waterman ou Sydney Wallis.

structurel Texte de l'espace réservé Capacités Texte de l'espace réservé Les services incluent ... ... ... ... Espace réservé Texte de l'espace réservé Espace réservé Texte de l'espace réservé

Services de sécurité Grâce à notre division AllSafe Services, nous fournissons à nos clients des professionnels de la sécurité et des agents de sécurité qualifiés pour superviser et surveiller la construction, la maintenance et les révisions. Nous mettons à disposition le personnel suivant : Responsables de la sécurité, superviseurs, techniciens et coordonnateurs Auditeurs de sécurité Rédacteurs et coordonnateurs de permis Commissaires aux incendies Agents de sécurité (surveillance des incendies, surveillance des trous et surveillance des bouteilles) Soutien au sol Ce que nous faisons Artisanat doux Mécanique Générale Services techniques Services de sécurité Services de fabrication Apprendre encore plus AllSafe est en activité depuis 2011 et dispose d'une équipe de direction qui a plus de 70 ans d'expérience dans la fourniture de professionnels de la sécurité et d'agents de sécurité hautement qualifiés pour soutenir les entreprises engagées dans des activités de construction, de maintenance et de redressement. AllSafe fournit du personnel de sécurité expérimenté et formé pour maintenir des sites de travail sûrs et conformes aux normes, spécifications et réglementations de l'entreprise, du propriétaire de l'installation et de l'industrie. Nous fournissons des professionnels de la sécurité tels que des gestionnaires, des superviseurs, des techniciens, des rédacteurs de permis, des coordonnateurs de permis et des agents de sécurité, y compris des pompiers, des préposés aux espaces confinés, du personnel de surveillance des bouteilles et du personnel de soutien au sol qui supervisent et surveillent l'exécution en toute sécurité des activités critiques effectuées sur les chantiers de nos clients pour garantir des opérations sûres et conformes.

Brock | Brock Group | Industrial Pipe Leak Repair | Enveloppement composite Il est inhérent à l'industrie que les systèmes de canalisations soient soumis à une corrosion externe et/ou interne excessive, à une érosion, à une abrasion, à des bosses et à des fissures qui conduisent à une dégradation des canalisations. L'exposition à ces facteurs entraîne une accélération de la détérioration interne et externe des canalisations. Composite Wrap Repair a été développé comme une option de réparation populaire pour les industries confrontées à la réparation/réhabilitation de leurs systèmes de tuyauterie. Applications Dommages dus à la corrosion Atténuer les problèmes de corrosion Maintenir les systèmes de tuyauterie critiques en service Réparations Systèmes en couches Systèmes de dépôt humide Avantages de l'enveloppe composite Capable d'installer pendant que le pipeline est en service Il peut ne pas être nécessaire de réduire la pression de fonctionnement pendant les réparations Aucun travail à chaud requis pour installer les systèmes de réparation composites Corriger, réparer et renforcer les défauts des canalisations en augmentant l'épaisseur des parois Réduire les contraintes thermiques inutiles causées par le soudage Application polyvalente pour les géométries complexes (par exemple, coudes, tés, etc.) Durée de mise en œuvre du projet plus rapide Solution de réparation économique Images fournies par

US Opérations Le groupe Brock offre des services d'un océan à l'autre aux États-Unis. Pour mieux répondre aux besoins géographiques uniques de nos clients, nous avons établi un réseau d'unités commerciales qui se concentrent sur la prise en charge de ces besoins uniques. Apprendre encore plus Apprendre encore plus Apprendre encore plus Apprendre encore plus Apprendre encore plus Apprendre encore plus Apprendre encore plus Apprendre encore plus

Prix de sécurité 2023

Schultz fournit des services de mécanique générale aux industries énergétiques de Californie depuis plus de 35 ans pour la construction, la maintenance et les révisions. Avec des bureaux dans le nord, le centre et le sud de la Californie, la société assure la maintenance de routine de presque toutes les grandes raffineries de pétrole de Californie. Schultz s'est imposé comme disposant des bonnes personnes et des bons outils pour fournir des résultats exceptionnels ! Brochure générale Contactez-nous! Capacités et expertise Schultz a soutenu avec succès un large éventail d'industries, notamment la production pétrolière et gazière, le traitement du gaz, les terminaux, les produits chimiques, les énergies renouvelables et la fabrication industrielle, avec une main-d'œuvre syndiquée. Schultz possède des bureaux dans le nord, le centre et le sud de la Californie. Construction Fabrication Maintenance Approvisionnement Gestion de projet Services de sécurité Revirements

La division Brock Services Metal Fabrications offre un savoir-faire industriel de qualité depuis plus de 40 ans. Nos capacités incluent le soutien aux projets de construction, de maintenance et de réparation à grande échelle. Capacités et expertise The Port Allen, LA facility consists of more than 25,000 SF of dedicated manufacturing area that house various CNC machinery, capable of fabricating a wide variety of quality parts. The space also includes the following equipment: High-speed CNC metal punch; Plasma Cutter; Hydraulic Press Brakes; 10′ Shears and 6 Rollers. Services mis en avant La division de fabrication de métaux fabrique et soude des alliages d'acier au carbone, d'aluminium, d'acier inoxydable et de nickel pour les industries du traitement chimique, de l'énergie, de l'énergie et du pétrole. Les services comprennent : le soudage, le poinçonnage du métal, la découpe et le partage du métal, le laminage, le moussage et le pliage du métal, la personnalisation et l'installation.

Brock | Brinderson | General Mechanical | General Mechanical Specialists | General Mechanical Near Rancho Dominguez | Piping Construction Services Near Rancho Dominguez | Piping | Piping Specialists | Piping Contractors Near Rancho Dominguez | AllSafe | Structural Construction Services Near Rancho Dominguez Who We Are Brinderson fournit des services de construction, de maintenance et de redressement aux industries énergétiques de la côte ouest des États-Unis depuis plus de 50 ans. Avec des bureaux à Washington et en Californie du Nord, Centrale et du Sud, Brinderson est la plus grande société de maintenance de raffineries de pétrole sur son marché et assure la maintenance de routine de presque toutes les principales raffineries de pétrole de la côte ouest des États-Unis. Contacter Brinderson Rancho Dominguez, CA 18841 S. Broadwick Street Rancho Dominguez, CA 90220 833.GO.BROCK 833.462.7625 First Name Last Name Email Subject Choose an option Message Thanks for submitting! Send BRINDERSON Rancho Dominguez, CA (Headquarters) 18841 S. Broadwick Street Rancho Dominguez, CA 90220 Benicia, CA 3070 Bay Vista Court, Suite E Benicia, CA 94510 Bakersfield, CA 19456 Creek Road Bakersfield, CA 93314 Burlington, WA 235 North Hill Boulevard Burlington, WA 98233 Salt Lake City, UT 948 N. 675 W. Salt Lake City, UT 84054

Discover Brock Group's expertise in refractory services and industrial safety training, ensuring top-notch solutions and continuous improvement. Réfractaire Les services réfractaires font partie du portefeuille complet de services offert par le groupe Brock. Les services sont effectués par nos techniciens hautement qualifiés qui ont plus de 20 ans d'expérience dans l'entretien de toutes les formes de réfractaires. Les artisans réfractaires de Brocks sont très expérimentés dans la réparation de fours industriels, d'incinérateurs et de chaudières. Expérimentée avec les dernières technologies et matériaux, l’équipe Brock livrera des résultats de qualité. Les services de Brock sont basés sur des programmes de gestion innovants et axés sur les processus qui maximisent collectivement l'efficacité des services groupés, ainsi que sur des capacités d'analyse comparative qui analysent les performances sur plusieurs sites, favorisant ainsi une amélioration continue. Solutions de services réfractaires Chaudières Fours Radiateurs Fours Réformateurs Générateurs de vapeur Les services incluent Fabrication de formulaires Couler des carreaux Effectuer des séchages en interne Installer les revêtements et les joints Solutions de services réfractaires Repli interruption (IFB) Tuiles de brûleur Réparations des murs du pont Réparations de murs en monobloc Joints de tubes Sites Peep formés sous vide Sols en brique et en béton Carreaux de céramique Projection humide entre les tubes Couvertures en fibre de céramique Doublure en brique

Services techniques Brock fournit à notre personnel hautement qualifié des processus efficaces et la bonne technologie pour apporter de la valeur à chaque aspect de notre entreprise. Notre engagement à fournir des solutions a abouti au développement et à l'application de nouveaux outils numériques conçus pour augmenter la productivité et réduire les coûts sur chaque chantier. Ce que nous faisons Artisanat doux Mécanique Générale Services techniques Services de sécurité Services de fabrication Penseurs avant-gardistes et changeurs de jeu Brock apporte depuis longtemps de l'innovation à notre industrie et aujourd'hui, l'entreprise perpétue cette tradition en développant et en appliquant de nouveaux outils numériques conçus pour augmenter la productivité et réduire les coûts sur chaque chantier. En tant que principal entrepreneur en services spécialisés, nous sommes avant-gardistes et changeons la donne, ce qui nous donne la liberté d’innover et de repousser les limites. Nous avons la flexibilité nécessaire pour identifier, valider et mettre en œuvre de nouvelles méthodes de travail, et c’est puissant. Nous construisons l’entreprise de demain tout en réalisant aujourd’hui chaque projet avec succès et en toute sécurité pour nos clients. FIELD-FORCE 3D MODELING FOR SCAFFOLD DESIGN SCAFFOLD MANAGEMENT SYSTEM MAINTENANCE PROGRAM MANAGEMENT DIGITAL TOOLS Le système de processus de projet mis en œuvre par le logiciel FieldFORCE fournit un cadre standardisé de technologies de pointe qui améliorent l'exécution sûre et fiable des projets de nos clients grâce à une collecte, une analyse et une communication de données organisées. Le cœur du système FieldFORCE est qu’il est intégré à notre suite ERP ; marier les données en temps réel avec les livrables du client ; garantissant ainsi la conformité contractuelle et réglementaire et permettant une meilleure précision dans le suivi des coûts et la productivité par projet. SYSTÈME DE GESTION D'ÉCHAFAUDAGES Le système de gestion des échafaudages (SMS) de Brock est conçu pour améliorer l'utilisation des échafaudages et le suivi sur site afin de réduire les dépenses en échafaudages et d'améliorer le temps de réponse pour répondre aux besoins d'échafaudages de chaque client. En tant qu'outil de gestion, SMS fournit des données sur l'état des stocks, l'utilisation et l'âge des échafaudages, les emplacements, la propriété, les heures et les coûts estimés, ainsi que le suivi des coûts pour permettre aux installations de réduire les dépenses en échafaudages et de répondre plus efficacement aux besoins en échafaudages. MODÉLISATION 3D POUR LA CONCEPTION D'ÉCHAFAUDAGES L'alignement de la portée des travaux pour toutes les personnes impliquées permet une planification initiale pour définir la portée et éviter des modifications excessives au cours du projet. Orientation claire pour les travailleurs grâce à des packages de travail organisés. Augmentation de la production sur le terrain de 10 à 15 % grâce à une plus grande fiabilité des conceptions et du nombre d'échafaudages. Une meilleure gestion des ressources qui permet d'obtenir les quantités correctes d'échafaudages, de consommables et de main-d'œuvre en temps opportun. Conception d'accès coordonnée, adaptée à plusieurs métiers. Réduction du temps de modification et de reprise car les modifications sont gérées avec le logiciel de conception avant l'installation, plutôt que sur le terrain après la construction de l'échafaudage. GESTION DU PROGRAMME DE MAINTENANCE Dans le cadre de notre offre globale de solutions, nous avons combiné efficacement nos ressources pour mettre en œuvre une variété de programmes de gestion de la fiabilité qui offrent des avantages de coût significatifs, permettant le développement de stratégies à long terme pour maximiser la protection des actifs des installations au coût total du cycle de vie le plus bas. Brock propose des audits personnalisés et une gestion de programme pour les éléments suivants : - Système de gestion de la protection incendie
 - Système de gestion de l’isolation de maintenance - Système de gestion de peinture d’entretien OUTILS NUMÉRIQUES Brock a la capacité d'afficher l'emplacement des constructions d'échafaudages en ajoutant des coordonnées GPS à l'étiquette d'échafaudage dans le logiciel de gestion des stocks d'échafaudages exclusif à Brock.

Brock Services fournit des services d'artisanat et de maintenance spécialisés à des industries clés à travers les États-Unis. Nous nous engageons à offrir le service et les solutions les plus sûrs et de la plus haute qualité à nos clients. Nous nous considérons comme des partenaires de nos clients, de nos employés et des communautés dans lesquelles nous opérons. Notre culture de la performance repose sur la présence et le développement des meilleures personnes, des processus les plus efficaces et des outils adaptés au travail. Brochure générale Contactez-nous! Capacités et expertise Brock Services propose des solutions basées sur des programmes de gestion innovants et axés sur les processus qui maximisent collectivement l'efficacité des services groupés, ainsi que des capacités d'analyse comparative qui analysent les performances sur plusieurs sites ; conduire une amélioration continue. échafaudage Isolation Réduction Revêtements et doublures Accès sur corde Isolement Entretien des installations Faites partie de la solution ! Plus de 15 000+ employés, répartis dans plus de 500 installations, fournissant des solutions sur lesquelles nos clients peuvent compter. Dès le premier jour où vous rejoindrez notre équipe, vous embarquerez pour un voyage qui sera à la fois stimulant et enrichissant. Ensemble, nous créons des solutions. Rejoignez notre équipe

Scaffolding Rental Near Deer Park | Insulation Contractors | Commercial Painting Near Deer Park | Certified Abatement Specialists | Spray Fireproofing Contractors Near Deer Park | Alternative Access Solutions | Sandblasting Companies Near Deer Park | Refractory Specialists | Clash Mitigation | Custom Leak Repair Wrap | Commercial Coatings | Brock Industrial | Commercial Insulation Blankets | AllSafe USA | Qui nous sommes Partout aux États-Unis, Brock Services, LLC dessert diverses industries, notamment la pétrochimie, le raffinage, la production d'électricité, l'offshore, la fabrication lourde, les pipelines et le transport, le nucléaire et les pâtes et papiers. Contacter Services Brock Deer Park, TX 4440 SH225 Deer Park, Texas 77536 833.GO.BROCK 833.462.7625 First Name Last Name Email Subject Choose an option Message Assigned to Thanks for submitting! Send BROCK SERVICES Houston, TX 777 N. Eldridge Parkway Suite 900 Houston, TX 77079 Deer Park, TX 4440 SH225 Deer Park, TX 77536 Corpus Christi, TX 353 Lantana Street Corpus Christi, TX 78408 Clute, TX 431 Commerce Street Clute, TX 77531 Beaumont, TX 1670 E Cardinal Drive Beaumont, TX 77705 Ft. Collins, CO 1118 NE Frontage Road Ft. Collins, CO 80524 Hazen, ND 104 12th Avenue NW, Suite 2 Hazen, ND 58545 Morris, IL 1536 Creek Drive Morris, IL 60450 Geismar, LA 36302 Highway 30 Geismar, LA 70734 Sulphur, LA 3747 South Beglis Pkwy, Suite 200 Sulphur, LA 70666 Auburn, ME 416 Lewiston Junction Rd Auburn, ME 04210 Gautier, MS 341 Highway 90, Suite A Gautier, MS 39553 Gorham, ME 9 Laurence Drive Gorham, ME 04038 Baltimore, MD 8124 Norris Lane Baltimore, MD 21222 Memphis, TN 2876 Directors Cove Memphis, TN 38131 Westford, MA 2 Lan Drive Westford, MA 01886 Pineville, NC 521 Eagleton Downs, Suite C, Pineville, NC 28134 Kingsport, TN 1801 Warrick Dr., Kingsport, TN 37660 Proctor, WV 15696 Energy Rd., Proctor, WV 26055

Electricité et instrumentation Texte de l'espace réservé Capacités Texte de l'espace réservé Les services incluent ... ... ... ... Espace réservé Texte de l'espace réservé Espace réservé Texte de l'espace réservé

Mechanical Insulation Companies | Insulation Services | Industrial Insulation | Thermal Insulation | Isolation L’expertise de Brock en matière d’isolation industrielle aide les installations à fonctionner avec une efficacité maximale tout en réduisant les risques et les réparations coûteuses. Nos capacités comprennent l'installation à l'appui de projets de construction d'immobilisations à grande échelle, les études d'efficacité énergétique, la maintenance et la réparation. L’expertise de Brock en matière d’isolation industrielle englobe des matériaux isolants qui répondent à la conception de processus spécifiques tels que la conservation de la chaleur, la cryogénie, la protection du personnel (brûlure et audition) et le contrôle de la condensation. Les isolants Brock ont installé avec succès du silicate de calcium, de la perlite expansée, de la laine minérale, de la fibre de verre, du verre cellulaire, des mousses poly et de l'aérogel de silice pour répondre aux spécifications des clients. Nous avons également l'expérience dans l'installation de toutes sortes de revêtements de protection pour la protection contre les intempéries ou pour retarder la transmission de vapeur. Solutions d'isolation Les services de Brock sont basés sur des programmes de gestion innovants et axés sur les processus qui maximisent collectivement l'efficacité des services groupés, ainsi que sur des capacités d'analyse comparative qui analysent les performances sur plusieurs sites, favorisant une amélioration continue. Les services incluent Contrôle de la stabilité de la température du processus Conservation de l'énergie (BTU) Protection individuelle (brûlures, glissades) Protection contre le gel Contrôle de la condensation (moisissure) Prévention de la corrosion sous isolation Gestion de la responsabilité amiante Contrôle des émissions (pollution atmosphérique) Services d'isolation industrielle Brock fournit des services d'isolation de qualité depuis plus de 30 ans à des clients de l'industrie lourde, notamment le raffinage, la chimie, l'énergie, les pâtes et papiers et le GNL. Nous avons de l’expérience dans l’installation d’isolation pour soutenir des projets de construction et de redressement d’immobilisations à grande échelle, ainsi que dans les activités d’entretien de routine. L’expertise de Brock en matière d’isolation industrielle englobe des matériaux isolants qui répondent à la conception de processus spécifiques tels que la conservation de la chaleur, la cryogénie, la protection du personnel (brûlure et audition) et le contrôle de la condensation. Les isolants Brock ont installé avec succès du silicate de calcium, de la perlite expansée, de la laine minérale, de la fibre de verre, du verre cellulaire, des mousses de poly et de l'aérogel de silice pour répondre aux spécifications des clients. Nous avons également l'expérience dans l'installation de toutes sortes de revêtements de protection pour la protection contre les intempéries ou pour retarder la transmission de vapeur. Nous comprenons l'importance d'une installation avec des recouvrements et une étanchéité des joints appropriés pour obtenir les meilleures performances de l'isolation sous-jacente, et nous nous engageons à fournir un service de la plus haute qualité pour atteindre cette performance. Le principal fabricant et installateur de systèmes d’isolation Brock possède une vaste expérience dans la conception, la fabrication et l’installation de couvertures isolantes amovibles et réutilisables. Nos artisans peuvent mesurer et fabriquer des couvertures amovibles pour des solutions d'isolation rapides et rentables sur le terrain dans le cadre des activités de maintenance de routine, ainsi que dans des environnements d'atelier pour soutenir des projets à plus grande échelle. Nous concevons et fabriquons les meilleures couvertures et couvertures industrielles réutilisables et amovibles pour : Applications d'eau glacée et cryogénique Échangeurs de chaleur et couvercles de collecteurs Turbines à vapeur et à gaz Vannes et couvercles de pompe Apprendre encore plus